Official Guard1anes 2020 Badge For Stadium Jersey

Add the official Guard1anes 2020 badge to your favorite 2020 Liga MX stadium club kit. 

• Place the Guard1anes 2020 badge on the right sleeve.
• Guard1anes 2020 badge for the stadium jersey.
• For the 2020 season jerseys only.

Heat Transfer Settings Recommendations:

• Temperature: 338ºF/170C
• Time: 25 seconds
• Pressure: 3 bar
• Peel: Hot (Peel almost immediately after pressing)

Heat Transfer Instructions:

1. Professional Heat Press Machine should be used when doing heat transfers to your apparel. Preferably let people who are familiar with the machine operation carry out the task for you. A Professional Heat Press Machine and customization experts are available at all Azteca Soccer retail locations. DO NOT USE A HOUSEHOLD IRON.
2. Pre-set the machine to the proper temperature, time, and pressure. Pre-heat apparel before applying any transfers to remove any wrinkles or moisture. Place the customization into the correct position with glue-side down on the apparel. Please note some transfer sheets have guidelines or text on them. These will not transfer to your apparel.
3. Cover the customization with a Teflon sheet, making sure not to move its position. Press the customization onto the apparel using the proper time, temperature, and pressure settings.
4. Please wait for the proper amount of time before peeling.
5. If customization does not fully stick onto the apparel, recover and press for another 5 seconds max.
6. Once the customization sticks and you have peeled the transfer sheet off, recover and press for another 3 seconds to ensure the set is completely bonded to the apparel.
7. Do not wash apparel for 48 hours after applying customization to ensure that it is properly bonded to your apparel.